New
Air Seeding
John Deere 730
Request price
Available through TRULAND Equipment
- Category
- Air Seeding
- Type
- Air Seeding
- Condition
- New
| Working widths | 28 ft 8.7 m |
| Number of ranks | 4 ranks of c-shanks,1 rank seed openers |
| Number of sections | 3 |
| Opener - Type | Double disk |
| Underframe clearance | 24 in. 60.9 cm |
| Mainframe - Centerframe width | 11-ft. 8-in. 3.56 m |
| Mainframe - Wing flexibility | 11 degrees up, 9 degrees down |
| Harrow - Type | Tine tooth |
| Harrow - Attachment | Rolling Basket with 1-bar harrow |
| Seeding tool depth control - Range | 1/4 inch increments |
| Type | Double disk |
| Penetration force | Patented Active Hydraulic |
| Boot | aluminum |
| Quantity | 46 on 7.5-in. spacing 56 on 6-in. spacing |
| Size | 13.5-in. (343 mm) with 0.25-in. (6 mm) offset |
| Spacing | 6-in. (15.2 cm) or 7.5-in. (19.1 cm) |
| Down pressure | Opener down pressure: 105 lb./opener Press wheel down pressure: 65 lb. at 1500 psi |
| Centerframe width | 3.56 m 11-ft. 8-in. |
| Cross tubes | 4x4-in. (102x102 mm) |
| End tubes | 2x5-in. (50x127 mm) |
| Hitch (tubular steel) | 6x10-in. (76x152 mm) |
| Rockshaft | 5.5 x 0.312-in. 140 x 7.92 mm |
| Folding | over-center |
| Wing flexibility | 11 degrees up, 9 degrees down |
| Fore-and-aft | 134 in. 3.51 m |
| Between ranks range | 29 to 41-in. (73.7 to 104 cm) |
| Hydraulics | active hydraulic downpressure |
| Attachment | Rolling Basket with 1-bar harrow |
| Trip clearance | 10 in. 25.4 cm |
| Trip force | 200 lb 890 N |
| Arc | 47 degree |
| Finishing tool | double bar harrow or rolling basket with single bar harrow |
| Range | 1/4 inch increments |
| Wing; standard | (4) 9.5Lx15 Load Range D walk-over tandems |
| Gauge wheels, wing | 2-7.60x15 8PR |
| Centerframe; standard | (4) 11Lx15 Load Range D walk-over tandems |
| Castering stabilizer | (2) 7.60x15 8 PR |
| Height | Maximum height: 12-ft. 9.3-in (3.90 m) Minimum height: 11-ft. 4.3-in (3.46 m) |
| Width | 16-ft. 3.6-in. (4.97 m) |
| Transport clearance | With sweep extenders: 16.26-in. (413 mm) Without sweep extenders: 17.26-in. (438 mm) |
| Minimum SCVs | 2 SCVs |
| Standard | Yes |
| Shipping location | Des Moines, IA |
Inventory moves fast. Call your nearest store to confirm this unit is still here and get the current price.
Yes. Send us the make, model, year and hours of your machine and we will apply the equity.
Often yes, through John Deere Financial and outside lenders depending on the machine. Subject to approved credit and to change.
Yes. We move equipment between all 17 of our Indiana and Ohio dealerships.
Tell us what you want to know about the John Deere 730.